HMPR-CE Cast-in Anchor Channels are rolled channels with swaged studs that are cast into concrete structures. This system method provides easy and safe fixations to structures such as concrete slabs.

The anchor channels are supplied with a filler strip within the channel slot, which prevents concrete ingress during casting. After the concrete is dried, the fillers are removed from the channels leaving an open slot on the wall for fixture connections.

Apart from the standard range of anchor channels bespoke design and manufacturing of anchor channels are done for areas where standard types cannot be used.

Special cast-in channels are preferred for areas where there are limitations such as complex corner applications, low slab thicknesses, reduced edge spaces and higher design loads.

HTB T Head Bolts and Lock Nuts are available to allow secure and easy connections to the anchor channels. The use of this system is applicable in a wide range of construction works.

Channel profiles available for casting are: 28/15, 38/17, 40/22, 40/25, 41/22, 49/30, 50/30, 52/34, 54/33, 72/49

• HMPR-CE Cast – in Channels are designed in accordance with the design rules according to CEN / TS 1992-4-3.
• HMPR-CE Anchor channels allow users to work with low edge distances.
• Load resistances can be improved with a higher concrete strength class on loading in shear.
• The shear and tension resistance of concrete can be improved with additional reinforcements.

The European Technical Approval ETA- 13/0399 for the HMPR-CE Anchor Channels was issued by the Deutsches Institut für Bautechnik (DIBt) in 2013.

This new approval is valid in all states of Europe. An ETA catalogue is available which includes the dimensioning of the anchor channels in accordance with the new European standards series CEN/TS 1992-4-3 “Design of fastenings for use in concrete – Anchor Channels.”