01707 260180
info@hazmetal.co.uk

Natural Stone Support Systems

Natural Stone Supports for Stone Cladding

Natural Stone support systems allow the fast and easy installation of stone cladding walls and can accommodate all types of load-bearing substrates whether they are concrete walls, block work & masonry walls or steel structures.

The following points are taken into consideration when designing a fixing system for natural stone installation.

  • Stone dimensions.
  • Cavity structure: projection size and isolation.
  • Application type: horizontal or vertical joint installation.
  • Joint size.
  • Structural wall backing.
  • Height of façade.
  • Relevant dynamic loads such as wind and seismic loads.
  • Design criteria of the project.

HAZ Metal proposes and specially designs fixing systems for natural stone cladding according to individual project requirements.

Fixing to concrete walls with
expansion bolts

Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.

Fixing to concrete walls with
expansion bolts

Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.

HSD Mortar Anchor Fixings

Fixing to concrete with bolts.
Can be used for 50 mm and larger stone thicknesses.
Various types to enable adjustability.
Installation at horizontal joints only

HZ Z Anchor Fixings

Fixing to concrete with bolts.
Projection sizes up to 135 mm.
Recommended for loads up to 800N.
Installation at horizontal or vertical joints

AXO Body Anchor Fixings

Fixing to concrete with bolts.
Projection sizes up to 135 mm.
Recommended for loads up to 800N.
Installation at horizontal or vertical joints

HZ Z Anchor Fixings

Fixing to concrete with bolts.
Projection sizes up to 135 mm.
Recommended for loads up to 800N.
Installation at horizontal or vertical joints